ELECON ET - Series modular gear units are the result of decades of experience in design and production, taking advantage of the most recent relevant research in the field of gearing technology.

Specifications

Types	Sizes	Ratio	KW Rating
SAN/ Single Red.hellcal	80-630	1.6-6.3	07/05/10
SBN/SBH/SBA Double, Red.hellcal	110-800	6.3-22.4	06/05/00
SCN/SCH/SCA Tripple Red.hellcal	160-800	14-112	01/04/00
SDN/SDH/SDA Quadruple Red.hellcal	225-800	112-630	02/05/90
KBN/KBH/KBA Double Red.bevel hellcal	80-560	06/03/18	01/06/00
KBVNL (Cooling Tower) Double Red.Bevel Helical	160-450	06/03/18	26 - 1944
KCN/KCH/KCA Tripple Red.bevel hellcal	110-800	14-100	01/01/50
KDN/KDH/KDA Quadruple Red.bevel hellcal	160-800	100-630	0.7 - 1130

Dual Tandem - Power Sharing Gear Box

Features :

Helical Gearbox with internally power sharing arrangement

 

Advantages :

Dual Tandem system at last two stages to increase power transmission capacity. Three piece housing for ease of maintenance

 

Technical Specifications :

B40 / BZ 2 x 80 S/So

 

Product Application :

Kiln Drives of Sponge Iron plant, Heavy Duty Mill Drive & Sugar Mill Drives

 

Range :

Available in ratios from 31.5 to 280 with power rating from 295 to 7600 kw

We have three Spiral Bevel Gear generating machines.

Following are the special features and range:

• Spiral Bevel gear/ pinion sets are manufactured according to Klingelnberg, Cyclo-Palloid Geometry
• Material of construction is 18CrNiMo7-6 as per EN 10084.
• Gears are Case Carburised and Hardened to the surface hardness of RC 60 + 2
• Gears are finished by Hard Cutting - HPGS with Quality class up to DIN 5 / AGMA 13

• Capacity:
  • Module:  1.2 to 15.5
  • Max. Outer Diameter: 1,100 mm

• Advantage of Hard Cut Spiral Bevel Pair
  
  • Surface finish and geometry as well as profile is improved as Hard Cutting process removes distortion errors of hardening o    Contact Pattern is increased which in turn reduce Noise and Vibration level
  • Gear Life is increased

Elecon has already manufactured several sizes of gear boxes for cooling tower application which are designated as KBV-NL. These are two stage gear boxes having 1st stage out of spiral bevel pair duly case hardened and lapped with another helical pair with case hardened and ground. Normally output shaft is vertically upward which takes the dynamic thrust of fan as well as dead weight of the same by virtue of thrust bearing which is provided in the gear box.



Description

Features :

Bevel Helical with horizontal input and vertically upward output shaft

 

Advantages :

Specially designed for cooling tower drives with heavy duty bearings on output shaft to take care external load

 

Technical Specifications :

KBV NL 280

 

Product Application:

Cooling Tower Drives

 

Range :

Available in ratios from 6.3 to 18 and power range of 13 kw to 500 kw